unitedwoodland@gmail.com
+6012-209 6689
Mon - Fri 08:00 - 17:00
Geobuildex Reinforced Facade Gabion
WHAT YOU NEED
Gabion Strength Face is available in different configuration:
1. Reinforced font strength face
2. Reinforced lateral strength face
THE FOLLOWING FIGURES REFER TO THE INSTALLATION OF CONFIGURATION 1
1. BUNDLE UNBOXING
Each individual basket will be removed from the bundle; unfold the gabion flat on the ground and stretch the unit making sure all creases are in the correct position for forming the box.
2. ASSEMBLING
Front, back, end panels and vertical diaphragm shall be lifted to a vertical position to form an open box shape, making sure tops of all four sides are at the same level. Pay attention to place reinforced strength face outward, so to form the strengthen wall face.
Panels shall be fastened together with lacing wire around the selvedge, the edges of the lateral faces and vertical diaphragm. It is suggested to place a formwork around the Gabion before starting the filling operations*.
3. FILLING
A. Once the gabion has been assembled, it is recommended to fill each gabion cell in 3 layers of stones (0.33m each).
B. To ensure a good finished appearance, all visible faces should be carefully hand-packed.
4. CLOSING
A. Fold the lid down and stretch into position.
B. Connect the lid to the other faces with lacing wire.
